Thermo Scientific™ Nalgene™ 65 Braided Platinum-Cured Silicone Tubing

Description

Utilisez la tubulure en silicone tressé durci au platine Thermo Scientific™ Nalgene™ 65 dans une variété d’applications de pompe et de transfert, notamment dans les applications pharmaceutiques, de laboratoire, de fabrication de bioprocédés et les applications des aliments et des boissons. Cette tubulure durable et de haute pureté est dotée d’une tresse de polyester pour améliorer la sécurité, la pression et la résistance aux pliures.

Features a low binding suface to minimize absorption of proteins and food products.

• Contains no phthalate plasticizers or peroxides to leach out into transported fluid
• Noncytotoxic and nonhemolytic
• Autoclavable; also can be sterilized by gamma radiation, ETO, and chemical procedures
• Durometer hardness: Shore A, 65

Warranty: 90 days

Ordering information: double-bagged in 25 ft (7.6 m) cases; 23°C

Sterilization guidelines: If practical, ethelene oxide is recommended. Even when autoclaved properly, large-diameter tubing (i.e., greater than 1/2 inch (12 mm)) may kink or become distorted. If possible, select heavy-wall tubing.

Autoclaving: 121°C/12 psig (1 bar) for 15 minutes. Clean and rinse tubing with distilled water before autoclaving. Certain chemicals that have no appreciable effect on resins at room temperature may cause deterioration at autoclaving temperatures unless removed with distilled water beforehand.

Gas: ethylene oxide formaldehyde

Disinfectants: formalin, ethanol, etc.

Radiation: gamma irradiation up to 50 kGy